36 RECORDING - ADVANCED OPERATION
LCD MONITOR DISPLAY - ADVANCED
Microphone indicator
Exposure compensation
White balance (p. 43)
Digital zoom (p. 52)
Image size (p. 44)
Image quality (p. 44)
Drive mode (p. 40)
Frame counter (p. 45)
Focus signal (p. 27)
Flash modes (p. 28)
Spot-metering area (p. 48)
Date-imprinting indicator (p. 51)
Camera-sensitivity display (p. 47)
Metering-mode indicator (p. 48)
RECORDING - ADVANCED OPERATION
LCD monitor
EXPOSURE COMPENSATION
The camera exposure can be adjusted to make the final picture lighter or darker by as
much as ±2Ev in 1/3 increments with still image and movie recording. The exposure-
compensation value will remain in effect until it has been reset. Exposure compensation
can also be set in the custom 1 section of the recording-mode menu (p. 46). The function
controlled with the left/right keys of the controller can be changed with the menu, see page 46.
The exposure compensation must be set before the image is captured. When setting the exposure
compensation, the amount of compensation is shown next to the exposure-compensation icon on the
monitor. When set to any value other than 0.0, the icon will remain on the LCD monitor as a warning.
To set the exposure compensation, the monitor must be on.
Color mode (p. 49)
To Next Page
Loading...
Need help?
General
