For the camera to be connected directly to the
computer and used as a remote imaging
device, the computer must be equipped with a
USB port as a standard interface. The computer
and the operating system must be guaranteed
by their manufacturers to support USB inter-
face. See chart for system requirements.
The remote-camera driver software must be
installed. Specific application software, such as
Microsoft Net Meeting, is required to view the
images. This function cannot be used with
Macintosh computers.
98 DATA-TRANSFER MODE
REMOTE CAMERA SYSTEM REQUIREMENTS
Minimum system requirements
Windows 98 Second Edition, Me,
2000 Professional, and XP.
Pentium II 300MHz or later
128MB of RAM. 256MB with Windows XP.
200MB of hard-disk space
800 X 600 16-bit color monitor
Remote camera tested with Microsoft Net
Meeting and Windows Messenger.
INSTALLING THE REMOTE CAMERA DRIVER
The driver needs only to be installed once. This driver is
not compatible with Macintosh operating systems.
Before connecting the camera to the computer, place the
DiMAGE Viewer CD-ROM in the CD-ROM drive. The
DiMAGE installer menu should automatically activate. To
install the driver, click on the DiMAGE remote-camera
installer button.
To Next Page
Loading...
Need help?
General
