86 DATA-TRANSFER MODE
CONNECTING TO WINDOWS 98 AND 98SE
The driver needs only to be installed once. If the driver cannot be installed automatically, it can be
installed manually with the operating system’s add-new-hardware wizard; see the instructions on the
following page. During installation, if the operating system requests the Windows 98 CD-ROM, insert
it into the CD-ROM drive and follow the accompanying instructions on the screen. No special driver
software is required for other Windows operating systems.
Before connecting the camera to the com-
puter, place the DiMAGE Viewer CD-ROM
in the CD-ROM drive. The DiMAGE
installer menu should automatically acti-
vate. To automatically install the Windows
98 USB driver, click on the starting-up-the-
USB-device-driver-installer button. A win-
dow will appear to confirm that the driver
should be installed; click “Yes” to continue.
Automatic Installation
When the driver has been successfully
installed, a window will appear. Click “OK.”
Restart the computer before connecting
the camera (p. 84).
To Next Page
Loading...
Need help?
General
