To Next PageTo Next PageWhat to do if my Minolta EP1054 makes copies too dark when using manual exposure?
If the manual exposure level is set on the darker side, press the Exposure Control Key (Lighter) as necessary to obtain the desired result.
What to do if my Minolta Copier makes copies too light when using manual exposure?
Press the Exposure Control Key (Darker) as necessary to obtain the desired result if the manual exposure level is set on the lighter side.
What to do if my Minolta EP1054 Copier's original glass is dirty?
Wipe the Original Glass clean with a soft dry cloth if the entire surface of the Original Glass is dirty.
What to do if my Minolta EP1054 copies are too light after replacing the toner bottle?
If the copier needs more toner after The Toner Bottle has just been replaced, press the Auxiliary Toner Replenishing Key as many times as required to obtain the desired result.
How to add toner to Minolta EP1054 when copying a dark original?
If you have been making copies from a photo or an original with a large dark area, and the copier needs more toner, press the Auxiliary Toner Replenishing Key as many times as required to obtain the desired result.
What to do if the paper is damp in my Minolta EP1054?
Replace the paper if the paper is damp.
General| Max Paper Size | A3 |
|---|---|
| Type | Digital |
| Resolution | 400 dpi |
| Zoom Range | 50% - 200% |
| Power Consumption | 1, 500 W |
Procedures for installing the copier, including site, power, grounding, and space requirements.
Guidelines for safe operation, including environment, handling, and maintenance.
Explains the function of each button and display element on the control panel.
A table summarizing warning indicators, their states, and actions.
Provides step-by-step guidance for specific indicator lights and their resolutions.
Addresses common copy quality issues such as light or dark images and their causes.
Troubleshoots issues where the copier does not operate correctly or respond to controls.
