Minolta EP1054 - Making the Users Choice Mode Settings

Auxiliary Functions
4
EP1085 4-11
MakingtheUser’sChoiceModeSettings
1 Keep pressing the Panel Reset Key for about 3 seconds.
[U] appears on the Zoom Ratio Indicator, and the indicator on the
Multi-Copy Display goes out.
2 Using the Key Pad, enter the desired Choice Code number.
If you have pressed an incorrect number, press the Clear Key, then
enter the correct number.
Example: Selecting the Default Finishing Mode: Press and
the Zoom Ratio Indicator shows [U 14].
3 Press the Start Key.
This causes the current setting of that particular choice code to be
shown on the Multi-Copy Display .
Panel Reset
1139O4782A
1139O3850A
1139O3860A
Zoom Ratio
Indicator
Multi-Copy
Display
1 4
1142O056AA
1
7
3
6
9
C
2
5
8
0
4
1139O3860A
Multi-Copy
Display
Zoom Ratio
Indicator
1139O2360A
1139O3880A
Multi-Copy
Display
ZoomRatio
Indicator