5
When an Indicator Lights Up
5-16 EP1085
NOTE
è An improperly installed I. U. could be a cause of copier malfunction.
8 Lower the Upper Half of the copier
and push it into the locked position
by pushing down on the portion
marked with “Push Down Here
Only”.
Charging the Copier with Starter and Toner
1 Swing out the Bottle Holder.
2 Holding the Starter Bottle so that its
tab is on the upper side, shake it
well.
NOTE
è Make sure that “MT starter 104” is
printed on the Starter Bottle.