Getting to Know Your Copier
2
EP1054 2-3
Inside Copier
Pcs. Specification Description
1 Original Width/Length
Scale
Place the original along these Scales for correct
positioning, see page 3-4.
2 Original Pad Holds the original in position on the Original Glass.
3 Original Glass Place the original face down on this Glass, see page 3-4.
4 Corona Unit Cleaning
Lever (Upper/Lower)
Operate the Lever to clean the corresponding Corona Unit
if unwanted lines are produced on the copy,
seepage8-4.
5 Lock Release Lever Turn counterclockwise to swing up the Upper Half of the
copier to clear a paper misfeed, see page 5-7.
6 Toner Bottle Contains toner. Replace it with a new one when the Add
Toner Indicator lights up, see page 5-2.
7 Toner Bottle Holder Swing open to replace the Toner Bottle, see page 5-2.
1
2
3
4
5
6
7
To Next Page
Loading...
