When an Indicator Lights Up
5
EP1085 5-1
5 When an Indicator Lights Up
5.1 Quick Reference for Indicator Lights
When the copier encounters any of the following conditions, a
corresponding warning indicator lights up. Some of the warning conditions
entail inhibition of the initiation of a copy cycle:
A control panel key or keys have been incorrectly operated.
Not all necessary conditions are met to start a copy cycle.
The copier requires the operator’s intervention during a copy cycle.
The following table explains the most important warning conditions. You
will find more detailed procedures on the page referenced in the “Action”
column.
Warning Indicators
Indicator Copier State Action
Add Toner
Indicator
The copier has run out of toner.
(Warning only and a copy cycle can
still be initiated.)
Replace the Toner Bottle following
the steps given in the “Add Toner
Indicator” section, see page 5-2.
Add Paper
Indicator
The paper has run out. Add paper by following the steps
given in the “Add Paper Indicator”
section, see page 5-4.
Misfeed
Indicator
There is a misfeed sheet of paper
insidethecopieroranoption.
Check the Monitor Display for the
location of the misfeed and clear the
misfeed sheet of paper as
instructed, see page 5-7.
Call-Tech.-
Rep. Indicator
The copier has developed a
technical malfunction.
If the Call-Tech.-Rep. Indicator
remains litevenafter you have reset
it, call your Technical
Representative, see page 5-10.
I.U. Service
Life Indicator
Indicates that the Imaging Unit
needs replacement.
Replace the Imaging Unit, see page
5-11.
A
100%
Meter Count
Toner
Drum Dehumidify
Paper
%
50%~200%
Auto
Lighter Darker
Book
Photo
Auto/Photo
141% A4
@
A3
115% B4
@
A3
100%
@@@
Full Size
81% B4
@
A4
70% A3
@
A4
A3
@@
A4
@@
B4
A4
@@
FLS.
A5
@@
Inch
To Next Page
Loading...
