Getting to Know Your Copier
2
EP1054 2-11
2.4 Turning ON and OFF, and Resetting the Copier
Turning ON and OFF
Turning the Copier ON: Press the
Power Switch to the “1” position.
Turning the Copier OFF: Press the
Power Switch to the “…” position.
NOTE
è The Auto Shut OFF function will automatically shut down the copier a
givenperiod of time after the last activity. The initial setting is 30
minutes.
Useful Tip
The period of time can be changed by using the User’s Choice, see
page 4-10.
When the Copier is Turned ON
The Start Key blinks orange, indicating that the copier is now warming
up.
In about 30 sec., the Start key turns green. Now the copier is ready to
make copies.
Blinking Orange Turns Green