Minolta EP1054 - Using the Manual Bypass Tray; Using the Multi Bypass Tray (Option)

3
Making Copies
3-14 EP1054
Using the Manual Bypass Tray
1 Place the original on the Original Glass and make the control panel
settings.
2 Insert the copy paper into the
Manual Bypass Tray.
This automatically starts the copy
cycle.
NOTES
è Insert the copy paper one sheet at a time.
è Do not insert a sheet of paper while the copier is warming up or in a
multi-copy cycle.
è The Auto Size Mode and Book Copying Mode cannot be selected for
manual bypass copying.
Using the Multi Bypass Tray (Option)
1 Place the original on the Original Glass and make the control panel
settings.
2 Swing down the Multi Bypass Tray
and slide the Paper Guide Plate to
the size of the copy paper.
NOTE
è Pull out the Multi Bypass Tray Extender if you are using larger paper.