Making Copies
3
EP1054 3-13
3.6 Manual Bypass Copying
Use the Manual Bypass to make copies on paper not loaded in the
Drawer, or to copy onto OHP transparencies, translucent paper, or any
other special paper. When using Multi Bypass Tray, you can load multiple
sheets of copy paper.
Types of Paper
Plain paper (weighing 60g/m
2
to 90g/m
2
)
Thick paper (weighing 91g/m
2
to 157g/m
2
)
OHP transparencies, translucent paper
Paper Size
Width: 100mm to 297mm
Length: 140mm to 432mm
Capacity
Plain paper, Thick paper, OHP transparencies, translucent paper
...1sheetatatime
Capacity Multi Bypass Tray
Plain paper: Approx. 50 sheets
Plain paper (once-copied paper): Up to 20 sheets
Thick paper, translucent paper: Approx. 20 sheets
OHP transparencies: Up to 5 sheets
IMPORTANT
è When making multiple copies using OHP transparencies, set the Copy
Tray into the upper position if there is no Sorter or Staple Sorter
mounted.
To Next Page
Loading...
