Minolta EP1054 - Copier Parts and Accessories; Outside Copier

2
Getting to Know Your Copier
2-2 EP1054
2.2 Copier Parts and Accessories
Outside Copier
Pcs. Specification Description
1 Control Panel Use to start a copy cycle or to make copying-job settings,
see page 2-6.
2 Original Cover Holds the original placed on the Original Glass in position.
To place an original, raise the Cover and place it in position
on the Original Glass, see page 3-4
3 Power Switch Use to turn the copier ON and OFF, see page 2-11.
4 Manual Bypass Tray Use for manual feeding of paper into the copier,
see page 3-13.
5 Right Door Open to clear a paper misfeed, see page 5-7.
6 Total Counter Shows the total number of copies made so far.
7 Front Door Open to:
 Replace the Toner Bottle, see page 5-2.
 Clear a paper misfeed, see page 5-7.
 Clean the Corona Units, see page 8-4.
Closing the Front Door after a misfeed has been cleared
will turn the Misfeed Indicator on the control panel OFF.
8 Paper Drawer Holds up to 250 sheets of paper. The Edge Guide and
Trailing Edge Stoparemovable, allowing you to loadpaper
of different sizes, see page 5-4.
9 Exit Tray Holds copies fed out of the copier.
10 Copy Tray Extender Slide this out when making copies on large-size paper.
12
3
4
5
67
8910