When an Indicator Lights Up
5
EP1085 5-17
3 Peel off the tape from the Starter
Bottle.
4 Align the markings on the Starter
Bottle with the upper side of the
Bottle Holder and slide the Bottle
into position.
NOTE
è Insert the Bottle all the way into the copier until the marking on the
Bottle is aligned with the marking on the Bottle Holder.
5 Then, swing in the Bottle Holder
until it locks into position. Close the
Front Door.
6 Plug the Power Cord into the wall
outlet and turn ON the Power
Switch. This will cause the wait
indicatortobeshownonthecontrol
panel.
To Next Page
Loading...
