Minolta EP1054 - Page 75

When an Indicator Lights Up
5
EP1085 5-15
3 Carefully pull the polyester tape
from the I. U..
4 Remove the Cap from the I. U. and
re-fit it to the used I. U. as shown in
the illustration.
5 Align the I. U. with the rails in the
copier.
6 Slide the I. U. all the way into the
copier.
7 Be sure to push the I. U. into the
locked position until a click is heard.
Then, check the position of the Lock
Release Lever, as shown in the
illustration.