4
Auxiliary Functions
4-10 EP1085
U-21 Energy Saver ON Timing
Select whether or not to set the copier into the Energy Saver mode after
the lapse of a given period of time after a copy cycle has been completed
or a key on the control panel has been operated.
Theperiodoftimecanfallwithintherangeof1to98min.,orbesetto240
min.
The initial setting is 15 min.
U-28 Auto Shut OFF Timing
Select whether or not to enable the Auto Shut OFF Function that turns
power off automatically after the lapse of a given period of time after a
copy cycle has been completed or a key on the control panel has been
operated.
In the initial setting, the Auto Shut OFF Function is activated after 30 min.
If you want to disable the Auto Shut OFF function, first select “1” in the
Non-Auto Shut OFF Mode then select “0” in this Mode, see page 4-6.
Setting Description Initial Setting
1 Enabled : 1 min.
2 Enabled : 2 min.
3 Enabled : 3 min.
:
:
:
:
98 Enabled : 98 min.
99 Enabled : 240 min.
Setting Description Initial Setting
0 Disabled*
1 Enabled : 1 min.
2 Enabled : 2 min.
3 Enabled : 3 min.
::
98 Enabled : 98 min.
99 Enabled : 240 min.
To Next Page
Loading...
