Auxiliary Functions
4
EP1085 4-9
With EXP5 at the central level, the
exposure level is lower as the number
becomes smaller, and it is higher as the
number becomes greater.
U-20 Auto Panel Reset ON/OFF
Selects whether to activate the Auto Panel Reset function 60 seconds
after a copy cycle has been completed or a control panel key has been
pressed.
If “0” is selected:
The control panel settings remain valid even after 60 seconds.
If “1” is selected:
The control panel settings are canceled and the copier is reset into the
default mode after 30 seconds. (Auto Panel Reset)
If “2” is selected:
The control panel settings are canceled and the copier is reset into the
default mode after 60 seconds. (Auto Panel Reset)
Setting Description Initial Setting
0 Auto Panel Reset is not activated.
1 Auto Panel Reset is activated (after 30 sec.)
2 Auto Panel Reset is activated (after 60 sec.)
Lighter Darker
Auto/Photo
123 4 5678 9
To Next Page
Loading...
