Combinations for Combined Functions
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
A to F : The settings can be made only when the copier is equipped with the following options.
A : Duplex Unit
B : Duplexing Document Feeder
C : Automatic Document Feeder
D : 10-Bin Sorter
E : Staple Sorter
G : The Cover mode cannot be selected when any of the following settings has been made for
Org. Copy. If any of them is selected after the Cover Mode has been selected, it cancels the
Cover Mode.
• 1 2 • Book 1
• 1 2[2 in1] • Book 2
H : You cannot select Book 1 if you have previously loaded an original into the Automatic/
Duplexing Document Feeder.
If you load an original into the Automatic/Duplexing Document Feeder after you have selected
Book 1, the copier cancels Book 1 and selects 1 1.
I : The Sort-and-Staple mode can be used only when you load two or more originals into the
Automatic/Duplexing Document Feeder.
J : The Cover mode can be used only when the Automatic/Duplexing Document Feeder and Multi
Bypass Tray are used.
K : The Interrupt mode takes precedence. The Interrupt mode cannot be used if 1 2, 2 2,
1 2[2in1], or Book 2 has been set in the copy-job program previously called up.
L : A zoom ratio or a copy-job program set in the Interrupt mode cannot be stored in memory.
M : Book 1 or Book 2 can be combined with the Sort-and-Staple mode, but no stapling action
takes place. (The copier performs only book copying and sorting of copies, but not stapling. )
▼
▼
▼
▼
▼
Chapter 7
Miscellaneous
3. Function Combination Matrix
97
To Next Page
Loading...
