Each of the Sort Bins holds up to 25 sheets of paper. The Auto Dual Function, however, allows
sorting of copies of up to 50 originals under certain conditions.
Auto Dual Function
When 5 or less copies are made from an original set consisting of more than 25 originals in the
Sort Mode, the Sorter or Staple Sorter is automatically switched into the Auto Dual Function
Mode using the 6th to 10th Bins.
Copies Bins Used
1st to 25th sorted copies 1st to 5th Bins
26st to 50th sorted copies 6th to 10th Bins
*
If the number of copies selected exceeds 5, the copy cycle stops at the 26th original.
* To have a complete set from the originals, place the copies from the 6th Bin on top of those from
the 1st Bin. In the same way, place the copies from the 7th Bin on top of those from the 2nd Bin,
and so on.
When 5 or less copies are made from an original set consisting of more than 25 originals in the
Sort-and-Staple mode and the Auto Dual function is activated, the Sort-and-Staple Mode is
automatically switched to the Sort Mode (no stapling takes place).
Auto Dual Function in the Sort Mode
Auto Dual Function in Sort-and-Staple Mode
When more than 25 copies are to be grouped together into one group, the Sorter or Staple Sorter
uses the subsequent Bin to continue grouping the copies.
Original Copies Bins Used
1st
1st to 25th copies 1st Bin
26st and subsequent copies 2nd Bin
3rd to Nth: Same way up to 10th
The capacity of the 1st Bin is 50 in the Non-Sort Mode. If more than 50 copies are made in the
Non-Sort mode, the Sorter uses the 1st, 2nd, and subsequent Bins to hold those excess copies.
When the Number of Copies Selected Exceeds 25 in the Group Mode
If the Number of Copies Selected Exceeds 50 in the Non-Sort Mode
Chapter 3
Making Copies
8. Finishing Mode
45
To Next Page
Loading...
