Minolta EP2010 - Selecting the Finishing Mode

Make sure that each copy set or stack
has been fed into the Sorter Bin.
1
Selecting the Finishing Mode
Sort &
Staple
Group
Finishing
1151O087CA
•
Each time the Key is pressed, the
newly selected finishing mode
indicator lights.
•
If there are no lights, the Non-Sort
Mode is selected.
•
Capacity of each Sorter Bin
(Non-Sort Mode)
Sorter Bin Capacity
1st Bin Up to 50 sheets
2nd to 10th Bin Up to 25 sheets
(Sort/Group/Sort-and-Staple Mode)
Sorter Bin Capacity
1st to 10th Bin Up to 25 sheets
•
Thick paper, translucent paper, and
OHP transparencies cannot be used
for making copies in the Sort, Group,
or Sort-and-Staple Mode.
NOTE
Manual
Staple
1139O2732A
1139O2732A
Press the Manual Staple Key.
Then the copy set or stack in the Sorter
Bin will be stapled.
2
Sort/Sort-and-Staple/Group Mode
(To sort or group copies)
Using the Manual Staple Mode
(To staple copy sets already made in the Sort
Mode or copy stacks made in the Group Mode.)
Press the Finishing Key to select the
desired mode.
1
Chapter 3
Making Copies
8. Finishing Mode
42