Minolta EP2010 - Chapter 6 Troubleshooting; When this Type of Copy Is Produced P; The Copier Is Not Functioning as Designed P

Chapter 6
Troubleshooting
1. When this Type of Copy is Produced p. 86
•
The image is too light
•
The image is too dark
•
The copy is blurry
•
The copy has dark specks or spots
•
The edge of the copy is dirty
•
The image on the copy is not aligned properly
•
The copy has lines
2. The Copier is not functioning as designed p. 88
•
The Control Panel shows nothing
•
No copies are fed out when the Start Key is pressed
•
Control Panel Keys do not respond
•
The Copier is not activated when the Power Switch is turned ON
This chapter gives you instructions on how to troubleshoot copier malfunctions.
Chapter 6
Troubleshooting
85