Minolta EP2010 - Instructions for Loading Originals for Finishing Mode

Place the original, with its stapling position at the upper right corner as shown in the illustration.
Note the correct direction of the originals if the copies are to be stapled either in the
Sort-and-Staple or Manual Staple mode.
Instructions for Loading Originals for Finishing Mode
Using the Automatic/Duplexing Document Feeder
Load the originals crosswise in the Document Feeder. Ensure also that the stapling position is at the
rear left corner as indicated by the arrow.
Correct:
1151O024AB
Copy
Originals loaded crosswise
Stapling Position
Placing the original on the Original Glass
Correct:
1039O2230A
Stapling Position
*
Press the Manual Staple Key to staple copy sets or a copy stack.
Chapter 3
Making Copies
8. Finishing Mode
44