Place the original face down on the
Original Glass.
2
1151O020AA
Align the rear left corner of the
original with the marker on the
Original Width Scale. Then press the
rear edge of the original up against the
Original Positioning Plate at the rear
side of the Glass.
3
Originals Not Suitable for the Automatic/Duplexing Document Feeder
Raise the Automatic/Duplexing
Document Feeder.
1
1151O021AA
Original Positioning Plate
Original Width Scale
Gently lower the Automatic/Duplexing
Document Feeder.
4
Chapter 3
Making Copies
2. Placing Originals
27
To Next Page
Loading...
