Select whether to enable or disable the function that automatically switches between the Sort and
Non-Sort mode depending on the number of originals loaded in the ADF when the copier is equipped
with an ADF and finishing option. If "ON" is selected, Non-Sort is selected if only one original is
loaded in the ADF and Sort is selected if two or more originals are loaded in the ADF.
Setting Value Description Initial Setting
0 Sort/Non-Sort switching OFF (disabled)
1
Sort/Non-Sort switching ON
(enabled)
Select whether or not to enable the Auto Shut OFF Function that turns power off automatically
after the lapse of a given period of time after a copy cycle has been completed or a key on the
control panel has been operated.
*In the initial setting, the Auto Shut OFF Function is activated 60 min. after the above-said event.
Setting Value Description Initial Setting
0
Disabled
1
Enabled : 1min.
2
Enabled : 2min.
3
Enabled : 3min.
:
:
:
:
98
Enabled : 98min.
99
Enabled : 120min.
1151H22OBA
1151H23OBA
U-24 Sort/Non-Sort Auto Switching ON/OFF
U-28 Auto Shut OFF Timing
Designates each drawer of the copier for special paper.
See p. 31 for more details on the special paper setting.
U-51 : 1st Drawer
U-52 : 2nd Drawer
U-53 : 3rd Drawer (Setting is possible only when the Paper Feed Cabinet is mounted)
U-54 : 4th Drawer (Setting is possible only when the Paper Feed Cabinet is mounted)
Setting Value Description Initial Setting
0
Special paper setting is not made.
1
Special paper setting is made for the drawer.
1151H24OBA
U-51 to 54 Special Paper Setting
Chapter 4
Special Functions
3. User’s Choice
57
To Next Page
Loading...
