When an Indicator Lights Up
5
EP2030 5-25
3 Holding down the Lock Release
Button, swing open Document
Turnover/Exit Unit Door and
carefully pull out the original from
the Exit Unit.
4 Close and .
5 Raise the Duplexing Document
Feeder. Opening the Document
Turnover/Feed Unit Guide Plate,
gently pull out the original from the
Unit.
6 Remove the original from the
Original Glass and lower the
Duplexing Document Feeder.
7 Return the number of originals
indicated on the Display to the
bottom of the original stack
removed in step 1 and reload it onto
the Document Feed Tray.
Example : Return two
originals.
F2
F1 F2
To Next Page
Loading...
