Minolta EP2030 - Using the Mixed Original Detection Mode

3
Making Copies
3-10 EP2030
UsingtheMixedOriginalDetectionMode
Usethe Mixed Original Detection mode to make copies automaticallyfrom
originals of assorted sizes loaded in the Automatic/Duplexing Document
Feeder.
If Auto Size is selected, you can make copies of the same size from
originals of different sizes.
NOTE
è The copier cannot staple together copies of different sizes made in the
Mixed Original Detection mode.
1 Load the stack of originals so that
the rear edge of each original is
pressed against the rear Document
Guide Plate. Then, slide the front
Document Guide Plate against the
front edges of the originals with the
greatest width.
2 Press the Mixed Original Detection
Key.
Mixed Original Mode
Auto Size Mode
Copy Paper: A4
CopiesOriginals
Manual
Staple
Sort
Sort &
Staple
1
Mixed Orig. Det.
2
21
11
2in1
1