Minolta EP2030 - Originals Not Suitable for the Automatic;Duplexing Document Feeder

3
Making Copies
3-12 EP2030
Originals Not Suitable for the Automatic/Duplexing Document
Feeder
1 Raise the Automatic/Duplexing Document Feeder.
2 Place the original face down on the
Original Glass.
3 Align the rear left corner of the
original with the marker on the
Original Width Scale. Then press
the rear edge of the original up
against the Original Positioning
Plate at the rear side of the Glass.
4 Gently lower the Automatic/Duplexing Document Feeder.
Original Width Scale
Original Positioning
Plate