Minolta EP2030 - Instructions for Loading Originals; Procedure; Notes for 2-Sided Copy Mode;2 In1 Mode

Making Copies
3
EP2030 3-27
Instructions for Loading Originals
Use the following procedure for loading originals to make 1-sided copies
from 2-sided originals.
Procedure
Load the originals crosswise.
If the originals are loaded lengthwise, the directions of the copy images
will be mixed up.
Notes for 2-sided Copy Mode/2in1 Mode
When making copies from 1-sided originals in the 1-sided Ö 2-sided,
1-sided Ö1-sided (2in1), or 1-sided Ö 2-sided (2in1) Mode, check the
number of originals.
If an odd number of 1-sided originals are used, add one blank sheet of
paper at the end of the original set.
Correct:
2-Sided Originals Ö 1-Sided Copies
Loaded Crosswise
Incorrect:
2-Sided Originals Ö 1-Sided Copies
Loaded Lengthwise
5
4
3
2
1
1
2
3
4
5
5
34
12
or
Blank Sheet of Paper
Originals 2-Sided Copies 2-in-1 Copies