Using the User Mode
4
EP2030 4-7
U-13 Default Auto Exposure Level
Determine the optimum exposure level in the Auto Exposure mode,
variable in seven steps.
When the exposure level is “Low,” the greater the level number is, the
lower the exposure level. When the exposure level is “High,” the greater
the level number is, the higher the exposure level.
U-14 Default Exposure Mode/Level
Determine the default exposure mode, either Auto or Manual, selected
when the Power Switch is turned ON or Panel Reset key is pressed.
If Auto is selected, this function also allows you to set the default exposure
level in the Manual Exposure mode, variable in 9 steps, after the Auto
Exposure mode has been canceled. If Manual is selected, the function
also allows you to set the default exposure level in the Manual Exposure
mode.
Setting Description Initial Setting
46 Low (level 4)
47 Low (level 3)
48 Low (level 2)
49 Low (level 1)
50 Standard
51 High (level 1)
52 High (level 2)
Auto Exposure Mode as Default
Setting Description Initial
Setting
Default Mode Exposure Setting in Manual Mode
0 Auto Manual EXP1
1 Auto Manual EXP2
2 Auto Manual EXP3
3 Auto Manual EXP4
4 Auto Manual EXP5
5 Auto Manual EXP6
6 Auto Manual EXP7
7 Auto Manual EXP8
8 Auto Manual EXP9
To Next Page
Loading...
