Minolta EP2030 - Instructions for Loading Originals for Finishing Mode; Using the Automatic;Duplexing Document Feeder; Placing the Original on the Original Glass

Making Copies
3
EP2030 3-33
Instructions for Loading Originals for Finishing Mode
Note the correct direction of the originals if the copies are to be stapled
either in the Sort-and-Staple or Manual Staple mode.
Using the Automatic/Duplexing Document Feeder
Load the originals crosswise in the Document Feeder. Ensure also that
the stapling position is at the rear left corner as indicated by the arrow.
Placing the Original on the Original Glass
Place the original with its stapling position at the upper right corner as
shown in the illustration.
Press the Manual Staple Key to staple copy sets or a copy stack.
Correct
Stapling Position
Originals loaded crosswise Copy
Stapling Position