Minolta EP2030 - Priority Orig. Ö Copy Type; Auto Panel Reset ON;OFF; Energy Saver on Timing

Using the User Mode
4
EP2030 4-9
U-18 Priority Orig. Ö Copy Type
Determine the orig. Ö copy type automatically selected when the Power
Switch is turned ON or Panel Reset key is pressed.
The initial setting is 1 Ö 2 if your copier is equipped with a Duplex Unit.
Consult your Technical Representative if you want to select 1 Ö 1when
your copier is equipped with a Duplex Unit.
U-20 Auto Panel Reset ON/OFF
Select whether or not to activate the auto clear function after the lapse of
a given period of time after a copy cycle has been completed or a key on
the control panel has been operated.
U-21 Energy Saver ON Timing
Select whether or not to set the copier into the Energy Saver mode after
the lapse of a given period of time after a copy cycle has been completed
or a key on the control panel has been operated. The period of time can
fall within the range of 1 to 98 min., or be set to 240 min.
The initial setting is 15 min.
Setting Description Initial Setting
01Ö 1

11Ö 2
22Ö 2
31Ö 1(2in1)
41Ö 2(2in1)
Setting Description Initial Setting
0 Disabled
1 Enabled: 30 sec.
2 Enabled: 1 min.

Setting Description Initial Setting
1 Enabled: 1 min.
2 Enabled: 2 min.
3 Enabled: 3 min.
:
:
:
:
98 Enabled: 98 min.
99 Enabled: 240min.