4
Using the User Mode
4-4 EP2030
4.3 User’s Choice
The copier has been set so that the most frequently used settings are
automatically selected in the initial mode. The User’s Choice allows you
to select the default settings which are automatically selected in the initial
mode according to your own needs. By setting defaults for the paper size,
zoom ratio, and other settings that are most frequently used, time and
effort to make extra settings will be eliminated that would otherwise be
spent when the copier is turned ON or when the auto reset function is
activated.
For more details, consult your TechnicalRepresentative.
U-0 Mixed Original Detection
Select whether to enable the Mixed Original Detection function or not
when power is turned ON or panel reset on the copier equipped with an
Automatic/Duplexing Document Feeder.
Functions Available from User’s Choice
Choice
Code
Function
Choice
Code
Function
U- 0 Mixed Original Detection U-20 Auto Panel Reset ON/OFF
U- 4 Lightweight Original U-21 Energy Saver ON Timing
U- 7 Non-Auto Shut OFF U-23 Auto Panel Reset for Plug-In
Counter
U- 9 File Margin U-24 Sort/Non-Sort Auto Switching
ON/OFF
U-10 Priority Paper Size/Source U-28 Auto Shut OFF Timing
U-12 AP/AS/Manual Priority U-51 Special Paper setting
(1st Drawer)
U-13 Default Auto Exposure Level U-52 Special Paper setting
(2nd Drawer)
U-14 Default Exposure Mode/Level U-53 Special Paper setting
(3rd Drawer)
U-15 Default Finishing Mode U-54 Special Paper setting
(4th Drawer)
U-18 Priority Orig. Ö Copy Type
Setting Description Initial Setting
0 Mixed Original Detection function ON
1 Mixed Original Detection function OFF
To Next Page
Loading...
