Minolta EP2030 - Auto Panel Reset for Plug-In Counter; Sort;Non-Sort Auto Switching ON;OFF; Auto Shut off Timing

4
Using the User Mode
4-10 EP2030
U-23 Auto Panel Reset for Plug-In Counter
Select whether to set the copier into the initial mode when the Plug-In
Counter is pulled out.
U-24 Sort/Non-Sort Auto Switching ON/OFF
Select whether to enable or disable the function that automatically
switches between the Sort and Non-Sort mode depending on the number
of originals loaded in the Document Feeder when the copier is equipped
with an Document Feeder and finishing option. If “ON” is selected, Non-
Sort is selected if only one original is loaded in the Document Feeder and
Sort is selected if two or more originals are loaded in the Document
Feeder.
U-28 Auto Shut OFF Timing
Select whether or not to enable the Auto Shut OFF Function that turns
power off automatically after the lapse of a given period of time after a
copy cycle has been completed or a key on the control panel has been
operated.
In the initial setting, the Auto Shut OFF Function is activated after 60 min.
* If you want to disable the Auto Shut OFF function, first select “1” in the Non-Auto Shut OFF
Mode then select “0” in this Mode, see page 4-5.
Setting Description Initial Setting
0 Copier is not initialized.
1 Copier is initialized when the Plug-In Counter is
pulled out.

Setting Description Initial Setting
0 Sort/Non-Sort switching OFF (disabled)
1 Sort/Non-Sort switching ON (enabled)

Setting Description Initial Setting
0 Disabled *
1 Enabled: 1 min.
2 Enabled: 2 min.
3 Enabled: 3 min.
:
:
:
:
98 Enabled: 98 min.
99 Enabled: 240min.