5
When an Indicator Lights Up
5-34 EP2030
5 Remove the Cap from the I. U. and
re-fit it to the used I. U. as shown in
the illustration.
6 Align the I. U. with the Rails in the
copier.
7 Slide the I. U. all the way into the
copier.
8 Be sure to push the I. U. into the
locked position until a click is heard.
Then, check the position of the Lock
Release Lever, as shown in the
illustration.
NOTE
è An improperly installed I. U. could be a cause of copier malfunction.
To Next Page
Loading...
