Minolta EP2030 - Page 4

EP2030
Using the Meter Count Function..................................................... 4-2
4.2 Toner Replenisher/Drum Dehumidifier....................................... 4-3
Toner Replenisher.......................................................................... 4-3
Drum Dehumidifier.......................................................................... 4-3
4.3 User’s Choice................................................................................ 4-4
U-0 Mixed Original Detection.......................................................... 4-4
U-4 Lightweight Original ................................................................. 4-5
U-7 Non-Auto Shut OFF................................................................. 4-5
U-9 File Margin............................................................................... 4-5
U-10 Priority Paper Size/Source..................................................... 4-6
U-12 AP/AS/Manual Priority........................................................... 4-6
U-13 Default Auto Exposure Level ................................................. 4-7
U-14 Default Exposure Mode/Level................................................ 4-7
U-15 Default Finishing Mode.......................................................... 4-8
U-18 Priority Orig. Ö Copy Type..................................................... 4-9
U-20 Auto Panel Reset ON/OFF .................................................... 4-9
U-21 Energy Saver ON Timing....................................................... 4-9
U-23 Auto Panel Reset for Plug-In Counter ................................. 4-10
U-24 Sort/Non-Sort Auto Switching ON/OFF ............................... 4-10
U-28 Auto Shut OFF Timing......................................................... 4-10
U-51 to 54 Special Paper Setting ................................................. 4-11
Making the User’s Choice Mode Settings..................................... 4-12
5 When an Indicator Lights Up
5.1 When the Add Paper Indicator Lights Up................................... 5-1
Adding Paper.................................................................................. 5-1
1st Drawer ...................................................................................... 5-1
2nd Drawer..................................................................................... 5-3
3rd/4th Drawer................................................................................ 5-4
3rd Drawer...................................................................................... 5-5
5.2 When the Add Toner Indicator Lights Up................................... 5-7
Replacing the Toner Bottle............................................................. 5-7
5.3 When the Add Staples Indicator Lights Up................................ 5-9
Replacing the Staple Cartridge....................................................... 5-9
5.4 When the Closure Failure Indicator Lights Up ........................ 5-12
5.5 When the Misfeed Indicator Lights Up ..................................... 5-15
Misfeed Indicator and Monitor Display ......................................... 5-15
Misfeed Clearing Procedures ....................................................... 5-16
Copier (Fusing/Transport Section) ............................................... 5-16
Copier (Paper Take-Up Section) .................................................. 5-18
Copier (Multi Bypass Section) ...................................................... 5-19
Paper Feed Cabinet (PF-206) ...................................................... 5-21