Using the User Mode
4
EP2030 4-13
4 Press the Clear Key.
This clears the current setting
(shown on the Multi-Copy Display)
of that particular choice code.
5 Using the Key Pad, enter the new
setting.
The Multi-Copy Display shows the
new setting.
6 Press the Start Key.
This enters the new setting.
Useful Tip
Repeat steps 2 to 6 to make new settings for other User’s Choices.
7 Press the Panel Reset Key.
This allows the copier to leave the User’s Choice Mode, and the
control panel shows the initial settings again.
123
456
789
0C
Zoom Ratio Indicator Multi-Copy Display
123
456
789
0C
Zoom Ratio Indicator Multi-Copy Display
To Next Page
Loading...
