Interleaf EP5000/EP4000 DIS/REASSEMBLY, ADJUSTMENT
97.04.01
D-35
(11) Removal of the Scanner Drive Cable
1. Remove the Original Cover.
2. Remove the Right Cover, Rear Cover, Rear Upper Cover, and Upper Left Cover.
3. Remove the Original Glass.
4. Remove the Scanner.
5. Remove Scanner Motor M2.
1156D048AA
1156D050AA
1134D037AA
1134D038AA
6. Remove two screws to free the SCP Board (PWB-F)
mounting bracket.
*The illustration shows where the SCP Board has been re-
moved for ease of understanding.
7. Remove two screws and Original Glass Cooling Fan Motor
M5.
8. Using a flat blade screwdriver, loosen the right spring an-
chor to unhook the bead from the anchor, thereby remov-
ing the cable.
9. Move the Scanner to the center and remove the Scanner
Fixing Bracket.
To Next Page
Loading...
