Minolta EP4000 - Size Detection

Interleaf EP5000/EP4000 GENERAL, MECHANICAL/ELECTRICAL
97.04.01
M-35
1156SBM1204A
12-4. Size Detection
D Original Size Detecting Board UN2 reads the output data provided by the original size
detecting sensors (PC115 to 119). By comparing the data from each sensor with the
threshold level, it determines whether there is an original placed on the Original Glass.
UN2 then determines the size of the original according to the combination of the data.
Metric Area
FD1 FD2 FD3 CD1 CD2
Original
Size
Size Determined
by UN2
LED
2
LED
1
LED
2
LED
1
LED
2
LED
1
LED
2
LED
1
A3L A3L (A3L) f f f f(f) f(F) f f f(f)
B4L B4L (B4L) f f f f(f) f(F) F f F(F)
A4L A4L (A4L) f f f F(F) F(F) F F F(F)
A5L A5L (A5L) f F F F(F) F(F) F F F(F)
A4C A4C (A4C) f F F F(F) F(F) f f f(f)
Letter L:
8-1/2” 11”
Letter L (Letter L) f f F F(F) F(F) F F F(F)
11” 17” 11” 17” (A3L) f f f f(f) f(F) f f F(f)
Legal:
8-1/2” 14”
Legal (A4L) f f f f(F) f(F) F F F(F)
FLS:
8-1/2” 13”
FLS (A4L) f f f f(F) F(F) F F F(F)
Letter C:
11” 8-1/2”
Letter C (A4C) f F F F(F) F(F) f f F(f)
No Original No Original F F F F(F) F(F) F F F(F)
Inch Area
FD1 FD2 FD3 CD1
Original
Size
Size Determined
by UN2
LED2 LED1 LED2 LED1 LED2 LED1 LED2
11” 17” 11” 17” (11” 17”) f(f) f f f(f) f(f) f f
Legal:
8-1/2” 14”
Legal (Legal) f(f) f f f(f) f(f) F F
Letter L:
8-1/2” 11”
Letter L (Letter L) f(f) f F F(F) F(F) F F
Letter C:
11” 8-1/2”
Letter C (Letter C) f(f) F F F(F) F(F) f f
FLS:
8-1/2” 13”
FLS (Legal) f(f) f f f(f) F(f) F F
Invoice:
5-1/2” 8-1/2”
Invoice (No Original) f(F) F F F(F) F(F) F F
No Original No Original F(F) F F F(F) F(F) F F
*f: Original Present F: Original Not Present
*If no optional sensors are mounted, data is processed as indicated in ( ) and the original
sizes determined by UN2 are as indicated in ( ).
*UN2 does not use the data provided by LED1 of Original Size Detecting Sensor FD1
(PC116) and LED2 of CD2 (PC119) for the determination of the original size.
*Any non-standard size is rounded off to the nearest standard size.