Minolta EP4000 - Adjust

Interleaf EP5000/EP4000 SWITCHES ON PWBs, TECH. REP. SETTINGS
97.04.01
S-44
1156SBS060302A
2. Adjust
D This function is used to adjust the optical system before shipment from the factory and must not be run
except when the RAM Board has been replaced with a new one or memory cleared. Further, when the
RAM Board has been changed or memory cleared, enter the factory settings indicated on the Adjust
Mode label affixed to the inside of the Front Door.
Factory Setting " Adjust
Touch Panel
Display
Operation
A0 Lens Focus Corrects the focal length of the Lens. (Match the grouping of the Lens being
used.)
Setting 49 50 51
Description
Short focal length
adjustment
Standard
Long focal
length adjust-
ment
A1 Lens Full Size
Position
Adjusts the zoom ratio in the crosswise direction by varying the Lens full
size position.
Setting 43 50 58. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Description
Reduction
direction
Enlargement
direction
A2 Mirror Full
Size Position
Corrects the optical path length of the Mirror with respect to the Lens focal
length.
Setting 43 50 58. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Description
Reduction
direction
Enlargement
direction
A3 Feed Direction
Mag. Ratio
Adjusts the zoom ratio in the feeding direction by varying the scan speed.
Setting 46 50 54. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Description
–1.6% (Reduc-
tion direction)
+1.6% (Enlarge-
ment direction)
0%. . . . . . . . . . . . . . . . . . .
A4 Scan Regist
Full Size
Corrects the amount of offset along the leading edge in the full size mode
by varying the Synchronizing Roller start timing.
Setting 40 50 60. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Description
–5.0mm
(Smaller)
+5.0mm
(Greater)
"0. . . . . . . . . . . . . . . . . . . . . . . . . .