Minolta EP4000 - Sub Hopper Toner Replenishing Mechanism

Interleaf EP5000/EP4000 GENERAL, MECHANICAL/ELECTRICAL
97.04.01
M-44
1156SBM1306A
13-6. Sub Hopper Toner Replenishing Mechanism
Sub Hopper Toner Replenishing Motor M9 is energized for the toner replenishing time
which is calculated based on the ATDC Sensor output voltage (T/C ratio) and the size
of the paper being fed through the copier.
Sub Hopper Toner
Replenishing Motor
M9
Sub Hopper Toner
Supply Roller
Bucket Roller
Developer Conveying/
Agitating Screw
Sub Hopper
Sleeve/Magnet
Roller
Rear of Copier
Front of Copier
1134M014AA
Controlled Part Control Signal ON OFF WIRING DIAGRAM
M9 PJ11A-2A L H 2-H