Minolta EP4000 - Development

Interleaf EP5000/EP4000 GENERAL, MECHANICAL/ELECTRICAL
97.04.01
M-37
1156SBM1300A
DEVELOPING UNIT13
D This copier employs the New Micro-Toning developing system. The toner fed up
to the Sleeve/Magnet Roller is conveyed onto the points of development as the
Sleeve/Magnet Roller turns, thereby forming a visible, developed toner image of
the original.
1156M015AA
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1. Toner Bottle
2. Developer Scattering Prevention
Mylar
3. Developer Scattering Prevention
Plate
4. Doctor Blade
5. Sub Hopper Toner Supply Roller
6. Toner Bottle Home Position Sen-
sor PC35
7. Toner Bottle Home Position De-
tecting Plate
8. Main Hopper Toner Replenishing
Motor M8
9. Sub Hopper Toner Empty Detect-
ing Lever
10. Sub Hopper Toner Agitating Lever
11. ATDC Sensor UN3
12. Developer Conveying/Agitating
Screw
13. Bucket Roller
14. Magnet Sheet
15. Sleeve/Magnet Roller