Minolta EP4000 - Leading Edge Registration in Reduction Mode

Interleaf EP5000/EP4000 DIS/REASSEMBLY, ADJUSTMENT
97.04.01
D-85
(3) Leading Edge Registration in Reduction Mode
1136D035AA
z Important
This adjustment should be made after the “adjustment of leading edge registration in the full size mode”.
2. Call the “Adjust 1/2” menu to the screen.
3. Touch the select key
t
or
s
to highlight “A5 Scan Regist Reduction”.
1156D138CA
1156D153CA
1. After the leading edge registration in the enlargement
mode has been adjusted, make three single copies on A3
or 11” 17” paper at 0.500 and check the 3rd copy for
leading edge registration.
(If the registration deviates from the specifications, per-
form the following steps to make the adjustment of leading
edge registration in the reduction mode.)