Interleaf EP5000/EP4000 GENERAL, MECHANICAL/ELECTRICAL
97.04.01
M-46
1156SBM1308A
13-8. Main Hopper Toner Replenishing Mechanism
D Toner is supplied from the Main Hopper to Sub Hopper as follows. When a toner–
empty condition is detected in the Sub Hopper, it energizes Main Hopper Toner Re-
plenishing Motor M8 to turn the Toner Bottle.
D The Home Position Detecting Plate fitted to the coupling and Toner Bottle Home
Position Sensor PC35 ensure that the Toner Supply Port in the Toner Bottle is posi-
tioned at the top whenever the Toner Bottle is stopped.
Toner Bottle
Toner Bottle
Coupling
1156M018AB
1136M034AA
Toner Supply Port
Toner Supply
Hole
Main Hopper Toner
Replenishing Motor
M8
Home Position
Detecting Plate
Toner Bottle
Holder
Toner Bottle Home
Position Sensor
PC35
Controlled Part Control Signal ON OFF WIRING DIAGRAM
M8 PJ11A-4A L H 2-H
Controlled Part Control Signal Blocked Unblocked WIRING DIAGRAM
PC35 PJ11A-9B L H 2-K
To Next Page
Loading...
