5. Commissioning
MiR Fleet PC Getting Started (en) 01/2021 - v.1.5 ©Copyright 2019-2021: Mobile Industrial Robots A/S. 22
5. Commissioning
This section describes how you connect robots to MiRFleet through the MiRFleet interface
and how you set up the parameters that will get your fleet up and running.
5.1 MiRFleet interface
The MiRFleet interface is very similar to the robot interface. Figure 5.1 shows what is
synchronized between fleet and robots in the Setup menu (green frame) and what is not
synchronized (red frame). The items in the red frame are fleet specific and must be set up in
the fleet interface.