40
Lever Control Installation
Fit control lever
Push the control lever over the square lever locator and make sure that the lever is
pointing down.
Tighten the grub screw with the extra long 2.5 mm hexagonal key (supplied) and fit
the grey handle plug.
Note! It is easier to locate the hexagonal key into the grub screw before fitting the
lever.
Fit the lever plug after all of the maximum temperature commissioning has been
carried out.
Combiflow Built in
Combiflow Exposed
Square Lever
Locator
Plug
Plug
Square Lever
Locator
Hexagonal Key
Hexagonal Key
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk
To Next Page
Loading...
