EasyManua.ls Logo

Mira COMBIFLOW - Maintenance; Cleaning; Ceramic Flow Cartridge Renewal; Pressure Balancing Cartridge Renewal

Mira COMBIFLOW
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45
MAINTENANCE
The Mira Combiflow is designed to be maintenance free, as such there are no
serviceable parts within the flow or pressure balancing cartridge. However regular
cleaning will keep the shower in pristine condition, refer to '1. Cleaning'. Strainers are
fitted to the inlets of the mixer to protect the cartridge and should give many years of
trouble free showering. Filters should be checked at yearly intervals and cleaned or
replaced to maintain optimum shower performance. Refer to section: 'Commissioning
and Control Assembly Installation, Flow Regulator Installation' for details on the
inlet filter location.
1. Cleaning
Many household cleaners contain abrasive and chemical substances, and should not
be used for cleaning plated or plastic fittings. These finishes should be cleaned with
a mild washing up detergent or soap solution, and then wiped dry using a soft cloth.
2. Ceramic Flow Cartridge Renewal
2.1 Refer to section: 'Reversed Inlet Connections' and follow instructions 1.3 to
1.4.
2.2 Unscrew and remove the headnut and remove the ceramic flow cartridge. Replace
with the new cartridge and make sure it is fitted in the correct orientation. Refit
the headnut.
2.3 Refer to section: 'Reversed Inlet Connections', instructions 1.10 to 1.11 and
section: 'Commissioning and Control Assembly Installation' to complete the
installation of the new ceramic flow cartridge.
3. Pressure Balancing Cartridge Renewal
3.1 Refer to section: 'Reversed Inlet Connections' and follow instruction 1.3 to 1.6.
Note! Before removing the pressure balancing cartridge note its position, to ensure
the correct orientation of the replacement.
3.2 Lever the pressure balancing cartridge from the shower body. Fit the new pressure
balancing cartridge and make sure it is fitted in the correct orientation.
3.3 Refer to section: 'Reversed Inlet Connections' and follow instructions 1.8 to
1.10 and section: 'Commissioning and Control Assembly Installation' to
complete installation of the new pressure balancing cartridge.
Carefully Lever Out
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

Related product manuals