Mira COMBIFLOW - Specifications

8
Mira Combiflow and Mira Combiflow B
Pressure Range
Minimum maintained pressure: 1.0 bar
Maximum maintained pressure: 5.0 bar
Maximum static pressure: 10 bar.
Note! For optimum performance, the initial supply pressures should be nominally
equal.
Temperatures
Hot and cold water supply temperatures MUST remain relatively constant.
Maximum hot water temperature: 80°C.
Ideally the hot water temperature should never exceed 65°C. A water temperature of
60°C is considered sufficient to meet all normal requirements and will minimize the
deposition of scale in hard water areas.
Connections
Inlet
15 mm Compression (Combiflow B).
15 mm Compression (Combiflow).
Outlet
1
/
2
'' BSP male (Combiflow).
15 mm Compression (Combiflow B).
Standards and Approvals
1. Designed to be used within systems in line with BS6700.
2. BS 6700 recommends that the temperature of stored water should never exceed
65 °C. A stored water temperature of 60 °C is considered sufficient to meet all
normal requirements and will minimise the deposition of scale in hard water areas.
SPECIFICATIONS
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk