Mirage 2000 - Color Temperature; Specifications

Section 5
Specifications
Mirage 2000/4000/6000 User’s Manual
5-1
NOTES: 1) Due to continuing research, specifications are subject to change without notice.
2) Specifications apply to both models unless otherwise indicated.
Panel Resolution and Refresh Rate
Pixel format (H x V) on 3 DMD panels 1280 x 1024 (SXGA)
Refresh rate 23.97 – 108 Hz
Achievable Brightness
(under maximum output conditions)
Mirage 2000 = 2000 ANSI lumens
Mirage 4000 = 4000 ANSI lumens
Mirage 6000 = 6000 ANSI lumens
Contrast Ratio
300:1 ANSI, 800:1 full on/full off (all models)
Colors and Gray Scale
Displayable colors (if 8-bit) 16.8 million
Gray scale resolution (standard) 8 bits
Gray scale resolution (with ADP installed) 10 bits
Color Temperature
Default 6500K
Range of Adjustment, standard 3200K to 9300K
Lens Type / Throw Ratio Diagonal Screen Size (ft.) Max. % of Image Offset from Lens Center
0.8:1
( VistaGRAPHX)
5-25 × 91% Ø100% ø 77%
1.2:1
5-30 × 104% Ø100% ø 77%
1.5 - 2.2:1
5-40 × 128% Ø100% ø 77%
2.2 - 4:1
5-40 × 128% Ø100% ø 77%
2.5 – 4:1
( VistaGRAPHX)
5-40 × 123% Ø100% ø 77%
4 - 7:1
8-40 × 130% Ø100% ø 77%
4 - 7:1
( VistaGRAPHX)
10-40 × 114% Ø100% ø 77%
NOTES: 1) VistaGRAPHX lenses (noted above) require a threaded adapter/flange for installation in this projector.
2) The 0.8:1 lens is not recommended for use in this projector.
3) VistaGRAPHX zoom lenses (noted above) do not offer motorized zoom function. Manual only.
4) Maximum offsets are reduced when simultaneously offsetting horizontally and vertically.
5) Offsets shown are for motorized lens mounts (optional upgrade required). Manual offset ranges may differ.
5.1 Specifications
Mirage
2000/4000/6000
Dis
p
la
y
'
Lenses
'