Mirion Technologies DMC 3000 - Page 11

-11-
151153EN-G
DMC 3000 User's Guide
2.3.7 Add-on Module
An additional module, such as a telemetry device, Hp(0,07) beta, Hp(10) Neutron or PRD module can be atta-
ched at the bottom of the DMC 3000 simply by removing the battery cover.
All these add-on modules have their own parameters saved on non-volatile memory and modify the display
conguration of the DMC 3000 when attached to it.
A module must be connected/disconnected to the DMC 3000, only when in PAUSE.
The Ψ icon appears at the top right corner of the display when a module is detected and measurement type
icon (on the bottom left corner of the display) gives the origin of Dose/Rate displayed (measurement or alarm
threshold).
General
Origin of Dose/Rate displayed
(measurements or alarm thresholds).
 : X+Gamma Hp(10)
 : Neutron Hp(10)
 : total dose ((X+Gamma) + neutron Hp(10))
 : beta and X+Gamma Hp(0.07)
 : Gamma rate in counts per second (PRD)
Module connected