Mirion Technologies DMC 3000 - Browsing Diagram in Pause

-17-
151153EN-G
DMC 3000 User's Guide
States Modes
Exemple of Data available Display
Last recorded X + Gamma Hp(10) dose
Last maximum X + Gamma Hp(10)
peak rate
Last duration in Run
Current Time
(AM/PM or 24H format)
Current Date
(MM--DD--YY or DD/MM/YY format)
Parameters Display
Dosimeter
number
Wearer’s name
Wearer ID
Dose alarm set
point
Dose warning
set point
Rate alarm set
point
Parameters Display
Rate warning set
point
Run time
warning set point
Chirp mode
Date of next
calibration
Dosimeter mode
Software
version
Data list in Pause and Run are congurable
with
dmc
User (choice and order) and depend
on module connected and conguration.
See § 4.5 for complete list.
Parameter list in Pause and Run are congurable with
dmc
User (choice and order) and depend on module
connected and conguration. See § 4.5 for complete list.
4.2 Browsing Diagram in Pause