The sleep mode state is a low-power consumption
state where the functional indicator ":" does not
blink.
When either button is pressed, or during communi-
cation with a reader, the DMC automatically goes
into Pause with a backlit display and all display
segments activate for 2 seconds.
Note:
- The rst press on any push button only turns
on the backlight for 3 seconds.
(1) The conguration of the set point is available in
autonomous mode only.
(2) Done manually in autonomous mode or
with the use of a reader in satellite mode.
4- States Modes
How to congure
in autonomous?
See § 4.4
How to switch
between
Pause and Run
modes in
autonomous?
§ 4.1
To Next Page
Loading...
